HIPROBOT
D1 MAX PRO
AgiBot
Technical data
- Weight
- 68 kg
- Payload
- 50 kg
- Speed
- do 3 m/s
- Joint torque
- 300 N·m
- Climbing
- 45°
- Runtime
- 5,5 h
AgiBot
D1 Max Pro
D1 Max Pro is a heavy-duty industrial quadruped for load carrying, material supply and equipment mounting. It sustains payloads up to 50 kg; standing it measures 1270 × 520 × 730 mm and weighs 68 kg. A 2160 Wh battery gives 5.5 hours of walking unloaded or a good two hours fully loaded, swapping is quick, and an autonomous charging dock is available.
Joints deliver up to 300 N·m in hardware; the robot climbs slopes up to 45 degrees, takes continuous stairs up to 30 cm — including open-riser industrial stairs — wades through 20 cm of water, and rights itself after a fall. It is IP67-rated and works from −20 to 55 °C. It senses with a 96-channel LiDAR and two cameras, computes with 117 TOPS, and supports TCP and ROS for development.
Stairs up to 30 cm
Continuous climbing of stairs up to 30 cm, including open-riser industrial ones; it rights itself after a fall.
From −20 to 55 °C
IP67 protection and operation from −20 to 55 °C, wading through 20 cm of water and work in cold, heat, rain and wind.
Loads up to 50 kg
It sustains up to 50 kg — material, equipment or mounted systems. The 2160 Wh battery lasts 5.5 hours of walking unloaded and two hours fully loaded; swapping is quick, and an optional dock lets it return to charge on its own.